Re: (PM) Euro PRI troubles...
portmaster@dalnet.se
Thu, 25 Feb 1999 10:34:31 +0100 (MET)
>On Thu, 25 Feb 1999, Bert Driehuis wrote:
>
>> telco. The Worldcom techs say that the line is provisioned according to
>> the same specs (CRC4 framing, HDB3 encoding). And, the line actually
>> works. What worries me is the number of CRC4 and E-bit errors, and
>> especially the rate at which they increase:
>
>> CRC4 302
>> E-bit 104
>> FAS bit 0
>>
>> This is shortly after a reboot. Half an hour later, we're looking at 11167
>> CRC4 errors and 211 E-bit errors. Needless to say, this makes me queezy
>> enough to switch the line back.
>
>Bert, if you find a definitive answer for this then _please_ get in touch
>with me also. We have the exact same problem. It seems that modem
>connects work passably, but we have been unable to get our local telco
>off their butts to help deal with this, they just say it's the fault of
>our PM-3, basically.
Hey I see the same thing, let me know too.
/Andreas Norman
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>