> telco. The Worldcom techs say that the line is provisioned according to
> the same specs (CRC4 framing, HDB3 encoding). And, the line actually
> works. What worries me is the number of CRC4 and E-bit errors, and
> especially the rate at which they increase:
> CRC4 302
> E-bit 104
> FAS bit 0
>=20
> This is shortly after a reboot. Half an hour later, we're looking at 1116=
7
> CRC4 errors and 211 E-bit errors. Needless to say, this makes me queezy
> enough to switch the line back.
Bert, if you find a definitive answer for this then _please_ get in touch
with me also. We have the exact same problem. It seems that modem
connects work passably, but we have been unable to get our local telco
off their butts to help deal with this, they just say it's the fault of
our PM-3, basically.
Mvh,
=09Kimmo.
-----------------------------------+-------------------------------------+ Kimmo Jaskari | =C5LCOM - =C5lands Datakommunikation Ab = | E-mail: kimmo@alcom.aland.fi | http://www.alcom.aland.fi | http://www.alcom.aland.fi/kimmo | Phone: +358-(0)18-12122 | ---------------------------------+-------------------------------------+
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>