Kris Rallapalli
sysop@kepnet.com
John Vozza wrote:
> Before sending an official request for engineering I wanted to see if
> people think this idea has merit.
>
> It appears that alot of disconnects can be eliminated by having end users
> limit the maximum connect speed via init strings in their modem setup. It
> is also a fact that getting the users to make those changes is a royal
> PITA.
>
> It seems to me that since the PM3's are using DSP's it should be possible
> to set a maximum connect speed for a particular user via a radius setting.
> I realize that the user would connect without benefit of the "max_speed"
> limit but at the first ret/ren the PM3 would "adjust" forcing the session
> to the max_speed setting. I do not see this as a global setting but more
> as a tool to help those users that complain or that the ISP notices are
> disconnecting frequently.
>
> Comments?
>
> John
> -------------------------------------------------------------------------
> NetRom Internet Services 973-208-1339 voice
> john@netrom.com 973-208-0942 fax
> http://www.netrom.com
> -------------------------------------------------------------------------
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>