solution:
set s1 spid <cr>
set s1 dn <cr>
set s2 spid <cr>
set s2 dn <cr>
that will clear them, so save all, reboot, power
it off for 5 minutes or so, then power on and
enter all the spids & dn's again, save all and
reboot, then it will come back online.
I'm not sure what causes this, but I think it's a
problem with the ORU actually.
On Thu, 16 Jul 1998, John M. Brown wrote:
|I have a customer (don't we all :) ) that has a OR-U
|that has been running just dandy to a PM-3. Uses
|Brooks Fiber for the ISDN port Switch is NI-1
|
|Yesterday the thing dropped and won't connect now to the
|PM-3
|
|Doing a SH ISDN S1 displays
|
|(edited)
|D00 status------ (127) 255 255 BRI_NI1
|Interface State: F7- active
|
|S1 -----
|Port State: NO-SERVICE
|Flags: 0x00
|6592: msg 19 SPID Register ERROR cause 1 Unassigned Number
|
|
|A SET DEBUG ISDN / SET CONSOLE gives
|
|S1 (0:1) REGISTER_NACK Unassigned Number
|isdn_match_callref(0:1) <= REGISTERED
|isdn_match_callref(0:2) <= REGISTERED
|host_proc: dsl 0, DISCONNECT_ACK invalid call ref
|
|This repeats for ever.
|
|I am remote and can't get to the box at this point. Can
|anyone give me some pointers. I think that the switch is
|fubar and is not taking the SPID's....???
|
|
|jmbrown
|-
|To unsubscribe, email 'majordomo@livingston.com' with
|'unsubscribe portmaster-users' in the body of the message.
|Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
|
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>