At 05:56 PM 7/7/98 +0200, Damir Sabol wrote:
>At 08:52 07/07/1998 +0100, Adrian Rowley wrote:
>>We are using several PM3s on our site. One of them has some strange
>>problems.
>>
>>Sometimes the system only accepts ISDN calls, and when you dial in with
>>a analog connection phone/modem you get no tone.
>>
>>Rebooting the unit softly doesent help. Only a hard reset helps the
>>problem.
>>
>>Has anyone got a clue to what it is? We get the error using all comos
>>versions. We run normal euroisdn back to back with an Ericsson AXE.
>
>We are having strange problems here. We started getting fast busy signals
>today on our PRI (EuroISDN). After the hard reset, it came back normaly.
>This happened twice in the last 3 weeks. First, with 3.7.2c3 and now with
>3.8.b13.
>
>Yesterday, red LED on Line0 came up (meaning that D channel is not
>up), but everything was working fine - ISDN and analog users were able
>to log in. 'Show Line0' showed that PRI was up and operational. After
>the soft reset, Red LED was still up. After the hard reset it went away.
>Only the Green LED was ON, as it should be.
>
>Could D channel be down with everything working normaly?
>Did anyone had similar problems?
>
>
>Damir Sabol
>Iskon d.o.o.
>Zagreb, Croatia
>
>
>
>
>
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>