>One thing to also check for..... uhm, you _do_ have modems installed
>right?
Yes, "show s1" , "show s0", etc work fine.
>Then what I do when a box is off-line for over 15 minutes is to attach to
>sXX
>atdt XXXXXXX
>
>to dialout and back in.... strange as it seems for our PRI it resets
>something...
Wish I could -- its a discount price PRI -- inbound only, no outbound calls
possible.
>> At 09:05 PM 1/27/98 -0700, you wrote:
>>
>> >That "no longer in service" message certainly isn't coming from your PM3
>> >and it doesn't surprise me that US West can't figure that out. The fast
>> >busy sounds like they provisioned it data only. Can you establish an ISDN
>> >connection?
>>
>> Nope. But you may be correct. I'll have to test that in greater detail
>> in the morning, when I can get them on the line. (It isn't US West, BTW).
>>
>> >> When I do "show s1" the status is: DCD- CTS+ TELCO+ so *I* believe that
>> >
>> >What does "sh line0" and "sh line1" reveal? (and "sh isdn")
>>
>> Unfortunately, I'm not at that location right now, and there's no Net
>> connection there yet..... I can't answer that until I go on-site in the
>> morning.... (We're moving from one office to another, and thought that if
>> we're moving our T1 and phones, we might as well go digital at the same
>> time -- and the 'Net T1 doesn't move until Thursday).
>>
>> Thanks, though, I'll answer this as soon as I can, and get back to the
list.
>>
>> Sh line1 won't be of any use -- there's only one PRI at this time. As I
>> recall, though, sh line0 said the circuit was UP, no yellow or blue alerts,
>> B8ZS and ESF. I haven't done a sh isdn yet.
>>
>> It is starting to sound, though, like the telco is full of it, and didn't
>> properly provision the line according to my instructions as alternating
>> voice and data.
>> -
>> To unsubscribe, email 'majordomo@livingston.com' with
>> 'unsubscribe portmaster-users' in the body of the message.
>>
>
>--
>Aloha from Paradise,
>
>Sherwood
>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.