Re: (PM) Basic CT1 and the PM3
clemdog@marshallnet.com
Wed, 28 Jan 1998 07:13:01 +0000
> We're offering access in a small town that does not have access to
> advanced CT1 features. I've run out of phone lines, am getting prodigeous
> busy signals and desperately need to upgrade. We can't get any more POTS
> lines into the location, so I want to covert my analog lines into digital
> lines. The phone company can't install the same type of CT1 into the
> remote location as we have here; I have no intentions of doing 56k;
> basically what I'm being told is that the only thing they can do is run 24
> lines accross a DS1; I know that I could get a Multi-Plexer to break them
> out, but what I'd really like to do is use a PM3. Does anyone know if
> this can be done? Sorry for the lack of specific info; I don't have any
> specifics yet. Any help would be appreciated. Thanks....
> -
Yes, If you can get trunkside CT-1's I would suggest it. If not line
side CT-1's will work well from my own experience. You can then just
plug the jack into your PM'3 and usually with an AMI and D4 signaling
on your PM3 your up and running. Also, if they are going to give
you lineside via a channel bank at the CO request they DO NOT use
AT&T FXS cards in the channel unit.
Jon Clemons
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.