I have a pm-25 that got interrupted during an upgrade. Yes, I know, that's
bad. So, now it won't boot. So, I tried a netboot, and that seemed to work
okay. It came up, downloaded the image, and booted into ComOS. I logged in,
and got this.
ether0 active ... 64K burst-IO
Running ComOS...
INet-X/Corvallis
PortMaster Console login: !root
Password:
ca06> show ses
SYSMSG604 SYSMSG211 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118
SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118
SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG208
SYSMSG459 ca06> show global
SYSMSG1071 SYSMSG1030 SYSMSG1031
SYSMSG1070 SYSMSG1035 OSPF Priority: 0
OSPF Router ID: 206.163.142.200
SYSMSG1072 , 198.68.7.11
SYSMSG1068 SYSMSG1037 Maximum PMconsole: 5
SYSMSG1038 (Pool Size 30)
SYSMSG1039 SYSMSG1270 PPP Authentication: PAP: on CHAP: off
SYSMSG141 IPX
ca06>
Cool, eh? On further study, this box always wants to netboot now,
independent of the position of #2 dipswitch. Am I hosed? Is there some
magical recovery tool that will save this poor pm-25 from the grave?
--------
Mark Zedwick
ProAxis Technical Support Supervisor
(541) 757-0248, (541)967-0248, (503) 587-0248
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>