Re: (PM) dialing out with a pm3 and PRI

Thomas C Kinnen (tkinnen@lucentradius.com)
Mon, 13 Dec 1999 17:02:08 -0800

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Christopher E. Brown: "Re: (PM) ram for PM3"
Previous message: wae@innova.net: "(PM) mib definitions for pmstatus"
Maybe in reply to: Joe Barnhart: "(PM) dialing out with a pm3 and PRI"

Joe Barnhart wrote:
>
> Can anyone point me to where the commands are for telling one of my pm3's
> to dial two channels out to an ISDN device at home so that I can be the
> *receiving* end instead of the end initiating the call?

Look at dial out locations in the configuration guide.

-- 
Thomas C Kinnen - <tkinnen@lucentradius.com> <kinnen@lucent.com>
[RADIUS Engineer] - LUCENT Technologies INS
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

Next message: Christopher E. Brown: "Re: (PM) ram for PM3"
Previous message: wae@innova.net: "(PM) mib definitions for pmstatus"
Maybe in reply to: Joe Barnhart: "(PM) dialing out with a pm3 and PRI"