* Motorla Bitsurfr ISDN ----> AT&F&C1&D2%A2=95%A4=0@B0=2@M2=P
JB
On Fri, 20 Nov 1998, Dayv wrote:
> I've been trying to set up a BitSurfer Pro ISDN modem to one of our
> co-located PM2e's running ComOS version 3.7.2...
>
> User gets authenticated, but cannot send any data after that. I tried
> pinging the IP that the user was assigned and i got no response, BUT the
> modem on the client side is sending and recieving data.
>
> The data and voice SPIDs are all inputed correctly as well as the switch
> type and version. Is anything special needed in configuration of the port,
> or an init string that anyone has handy? :)
>
> im currently using at&f%a2=95%a4=1s0=1
>
> Thanks.
>
>
>
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
/---------------------------- flaboy@fdt.net ------------------------------\
| Joseph Barnhart | IRC | HellSouth Communications |
| Technician / Ops | MUD | http://ns.hellsouth.com/bb |
| Florida Digital Turnpike | 56k Dialup | AoHELL.Org / www.aohell.org |
\---------------------------- 352-372-5100 ------------------------------/
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>