RE: (PM) Trying to set up a Motorola BitSurfer Pro ISDN Adapter on a PM2e...

Mike Dugas (mad@inr.net)
Fri, 20 Nov 1998 11:03:40 -0500

> I've been trying to set up a BitSurfer Pro ISDN modem to one of our
> co-located PM2e's running ComOS version 3.7.2...
>
> User gets authenticated, but cannot send any data after that. I tried
> pinging the IP that the user was assigned and i got no response, BUT the
> modem on the client side is sending and recieving data.
>
> The data and voice SPIDs are all inputed correctly as well as the switch
> type and version. Is anything special needed in configuration of
> the port,
> or an init string that anyone has handy? :)
>
> im currently using at&f%a2=95%a4=1s0=1

Are you going BitSURFR to BitSURFR? If so, you have to use the Bonding
protocol,
you can't use V.120 or PPP or anything like that... Here are the init
strings I'm
using that I got from Motorola...

115K (2B)
=========
AT&F2&C1&D2%A4=1

56K (1B)
========
AT&F2&C1&D2%A2=2%A4=1

I'm using them with the extra %A98=S (also %A93=E on the answering modem)
for doing
data over voice (Hell Atlantic territory... escaping the per minute
charges).

They've been going for 2 or 3 days connected straight with no problems
whatsoever.

Regards,

--
Mike Dugas                                      Sr. Systems Administrator
mad@inr.net                               InterNet Resource NETworks, LLC
(603) 880-8120                                        Fax: (603) 880-8783


-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>