> Hi, I have a new PM3 2T, ComOS 3.7.2c3, ComOS 3.8b15, ComOS 3.8b17 are
> all the OS's I have tried in sucession, and am currently at ComOS 3.8b17.
> I have one CT1 in Line0. I cannot seem to establish a 56k connection
> from a know working location with a Zoom, and Supra KFlex modems. I can
> however call my other PM3 ComOS 3.8b15 or b17 with a CT1, and connect
> sucessfully between 44k, 48k, and 50k, with both modems from the same
> location. The CT1 on the new PM3 is a a FX,(we are backhawling the
> trunks 6miles to our location. The switch is a Semens. The working CT-1
> is a Remote 5e with 5 repeaters, and works great. Below is the line0
> from the nonworking 56k connect PM3 and the working one. whats going on?
somewhere there may be a d/a-a/d conversion.... remember that you should
have only ONE a/d in the entire link from your calling modem to the PM3
-- Aloha from Paradise,Sherwood
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>