As somebody correctly wrote it is a Windows version issue as well.
It works on any OSR, and on 950a with password list update - (950a=950 with
SP1).
We have confirmed that it does not on 950 (no service pack).
Glad to be helpful,
Stavros N. Bairactaris
Administrator@smartnet.gr
-----Original Message-----
From: Marc HO-A-CHUCK [mailto:mhac@nplus.gf]
Sent: ÐÝìðôç, 2 Éïõëßïõ 1998 2:06 ìì
To: Stavros N. Bairactaris
Subject: Re: (PM) PM3 / DNS server automaticaly Assigned
Hi,
OK Thanks, it works...
It used to not works before, may be question of windows version like you
said ?
Thanks,
Marc HO-A-CHUCK
*** NET PLUS ***********************************************************
leader ISP en Guyane Francaise - Solution Internet/Intranet
http://www.nplus.gf
2 bd Republique - BP 125 - 97 323 Cayenne - Guyane Francaise
tel : +594 29 13 31 - fax : +594 29 13 27
****************************************************************************
-----Message d'origine-----
De : Stavros N. Bairactaris <Administrator@smartnet.gr>
À : Portmaster-Users <portmaster-users@livingston.com>
Cc : Marc HO-A-CHUCK <mhac@nplus.gf>
Date : mercredi 1 juillet 1998 18:58
Objet : RE: (PM) PM3 / DNS server automaticaly Assigned
>Hello,
>
>DUN Windows 95 clients will accept primary and secondary dns server
>addresses
>as they are known to the router under the condition that users have left
>"server properties"
>applet with the choice "server assigned dns address".
>
>This should work if on the network panel :
>1. The client does not have a NIC with DNS server different than the
dial-up
>adapter
>2. If he does NIC and RAS have no common properties on dns or bindings
>together.
>
>On dns server address conflict :
>
>1. RAS and NIC must have different tcp/ip properties (disable dns on
dial-up
>adapter).
>2. All unnecessary protocols and bindings should be removed.
>3. Before the PC can use a new set of protocols (new bindings) Windows has
>to be restarted.
>Tip: Try shutdown and restart while holding left shift key until it says
>that it does so.
>
>Stavros N. Bairactaris
>Administrator@smartnet.gr
>
>
>-----Original Message-----
>From: owner-portmaster-users@livingston.com
>[mailto:owner-portmaster-users@livingston.com] On Behalf Of Marc HO-A-CHUCK
>Sent: ÔåôÜñôç, 1 Éïõëßïõ 1998 11:05 ìì
>To: portmaster-users@livingston.com
>Subject: (PM) PM3 / DNS server automaticaly Assigned
>Importance: High
>
>Hi,
>
>Running
>PM3 (PRI connected)
>ComOs 3.8b15
>Radius 2.01 (livingston)
>
>Is it possible to configure the PM3 to enable our client to leave "Assigned
>DNS server" in Windows PPP remote access.
>
>Have searched for it everywhere with no success :-(
>
>Thanks.
>
>
>Marc HO-A-CHUCK
>
>*** NET PLUS ***********************************************************
>leader ISP en Guyane Française - Solution Internet/Intranet
>http://www.nplus.gf
>2 bd République - BP 125 - 97 323 Cayenne - Guyane Française
>tél : +594 29 13 31 - fax : +594 29 13 27
>***************************************************************************
*
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>