Re: (PM) Re: PM3 - PRI dial out - how to?

Thomas C Kinnen (tkinnen@usacomputers.net)
Sun, 14 Jun 1998 11:37:31 -0400

>I have tried both with voice on and voice off, chap on and chap off.
>Later, after much frustration and failure, I tried the same thing with my
>PM2e30 and it dialed out right away - just can't seem to force the PM3 to
>dial over PRI lines.

Ok, is the port set for network twoway and did you try the manuall dial ie:

attach Sxx
at &n1
atdt 555-5555

Oh yea, You pri does allow OUTBOUND calls correct? Locally we had to ask
Sprint to turn on outbound service as by default they set ISPs for inbound
only on CT1 and PRI.

Also did you try the other modulations to try different settings manually:

at&n Unrestricted 64Kbps data connection.
at&n0 3.1KHz audio service. On a PortMaster 3, use this command to place a
modem call.
at&n1 Speech service. On a PortMaster 3, use this command to place a modem
call.
at&n55 3.1KHz audio service.
at&n56 Restricted 56Kbps data connection.
at&n64 Unrestricted 64Kbps data connection.

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>