> Hi all,
>
> Our company uses Portmaster 3's with k56flex modems. We recently decided
> to try upgrading to ComOS 3.8b15 to get v.90 compatability. However, after
> the upgrade, we experience several problems, such as degradation of connect
> speed and disconnects. One problem in particular I would like comments on:
>
> One of our customers has a US Robotics Sportster x2 internal voice modem,
> running under Windows 95. He has flash upgraded it to the latest firmware,
> which is supposed to comply with the v.90 standard. However, when he uses
> it to connect to our PortMasters which were upgraded to ComOS 3.8b15, he
> gets disconnected after about 5 minutes of being online. He has an older
> 14.4 modem, which he can use to connect just fine, but his x2->v.90 flash
> upgraded modem gets disconnected.
What is the actual connection [speed] that he IS getting? Take a look at
a "show modems" and "show mX". It will list the Tx/Rx speeds as well as
the disconnect reason once he disconnects (although perhaps not
volunteerly). If he is not actually getting a V.90 connect then this may
be the V.34 issues I've spoken about in 3.8b15.
-jr
----
Josh Richards - <jrichard@livingston.com> - <josh@lucent.com>
[Beta Engineer] - LUCENT Technologies - Remote Access Business Unit
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>