> Our PM3 goes on line next week (assuming Bell doesn't screw it up), and
> we've just been posed the following question:
>
> > Will I be able to connect with ISDN using "Switched 56
> > Permissive Data Over Voice"?
>
> I think the answer will be yes, but a more authoritative answer is
> appreciated. A followup: How will this be identified in the NAS
> port type?
authoritative? hmm, well it is 'yes'..
this isn't directly Switched 56K, but it should be close:
ricki> attach s46
Trying 207.24.9.11 ...
Connected - Escape character is '^]'.
at&n56
OK
atdt 5381212
CONNECT 56000
Aloha! Login to internet@vantage!
login: !root
Password:
springer> sh all
Local Addr: 207.24.9.10 Default Host: 207.24.9.2
Gateway: 207.24.9.1 Netmask: 255.255.255.0
DNS Server: 207.24.9.2 Domain: iav.com
Port Speed Mdm Host Type Status Input Output
---- ----- --- ---------------- ------ ------------- ---------- ----------
C0 9600 off Login/ USERNAME 0 11
S0 26400 M0 ptp0 Netwrk ESTABLISHED 533824101 3823299028
S1 28800 M1 ptp1 Netwrk ESTABLISHED 511855859 3670573423
S2 14400 M5 ptp2 Netwrk ESTABLISHED 619591159 3717351852
S3 28800 M4 ptp3 Netwrk ESTABLISHED 442866275 2780274720
S4 50000 M6 ptp4 Netwrk ESTABLISHED 488527374 3164114763
S5 31200 M10 ptp5 Netwrk ESTABLISHED 491657553 3165639092
S6 64000 on ptp6 Netwrk ESTABLISHED 498290977 2936859666
S7 26400 M8 ptp7 Netwrk ESTABLISHED 598217784 3195512624
S8 28800 M2 ptp8 Netwrk ESTABLISHED 404083483 2945019404
S9 24000 M13 ptp9 Netwrk ESTABLISHED 491446610 3154912245
S10 56000 on Login/ COMMAND 444001541 3219849518
**note: I've taken off the pending column
but not that it shows a speed of 56000 for port S10
Hope this helps...
-- Aloha from Paradise,Sherwood
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>