> I'm attempting to setup a dialout connection from our PM3 to a
> customer's new Netgear rt328 isdn router. We've previously setup
> dialouts to an OR-U and an Ascend unit, both of which are currently
> active. I'm using more or less the same settings on the PM3:
[..]
>
> I have two ports setup as group 3. When dialing I get the following:
>
> Boone> set debug isdn on
> Enabling ISDN debugging
> Boone> dial boamlaw -x
> Starting dial to location boamlaw using S41
> sendthem (CRN7821787)
> S41: Sending Call Request - 7821787
> expect (?D=)
> S41: Received Proceeding
> S41: Received Alerting
> S41: Received Connect - B1
> ?D=got it
> Chat Succeeded - Starting PPP
>
> At this point 'show sess' shows the connection hanging on 'connection'.
> After a minute or so, the connection ends with no comment.
set console
set debug 0x51
-jr
----
Josh Richards - <jrichard@livingston.com> - <josh@lucent.com>
[Beta Engineer] - LUCENT Technologies - Remote Access Business Unit
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>