>From portmaster prompt I tryed:
attach sX ;with X being a port
at&n1 ;set to analog call
atdt XXX-XXXX
This works fine, I see the promt from the remote site.
Now I want to do this with define a location. But no result.
(group ok, dial out for port is set, modem on, debug is used)
I used the pmconsole for windows.
The only command, that work is in V.25 script
VRNxxxxx (send)
=DCD= (rec)
but no established, only connecting
all AT command in V.25 are ignored (that mean, I see no result during
debug while dial this location)
If I try to use a Async dial-Script, the debug shows only
a VRN send-Command, nothing else, no atxx\r-Command.
How get I the same result with a location as the few lines at start
this document?
Any help welcome.
Regards
-- ------------------------------------------------------------------- Thomas Rost, Network-Providing RSW GbR, Lichtenstein, Gera, Germany mailto:tro@net-prov.de, http://www.net-prov.de, http://www.linet.de ------------------------------------------------------------------- - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>