I've a IRX with a 128Kb leased line connected to it.
For different reason, I would like to restrict the bw at max 64K (or less)
How can I do that on the IRX side?
Here follows the serial config:
irx-bru1> sh s1
----------------------- Current Status - Port S1 ---------------------------
Status: ESTABLISHED
Input: 485776021 Abort Errors: 97
Output: 501385203 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 128K Ext Clock
Modem Control: off off
Remote Host: xxx.xxx.xxx xxx.xxx.xxx
Netmask: 255.255.255.192 255.255.255.192
Interface: ptp1 (PPP,Routing) (PPP,Routing)
Mtu: 1500 0
Dial Group: 0
TIA!
--
. .
. .
Xavier Mertens, . EuroNet Internet
Network Operation Center . Lozenberg, 22
. 1932 Zaventem
E-mail: xavier@euro.net . Tel: +32 2 7171701
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>