Re: (PM) Bandwidth restriction

Jason Hatch (zone@berkshire.net)
Wed, 6 May 1998 01:14:52 -0400 (EDT)

Channel down your DSU to one channel. The IRX will pull the clock off the
DSU and compensate. You'll also have to channel the DSU down at the other
end.

-Jason

On Wed, 6 May 1998, Xavier Mertens wrote:

> Hi!
>
> I've a IRX with a 128Kb leased line connected to it.
> For different reason, I would like to restrict the bw at max 64K (or less)
> How can I do that on the IRX side?
>
> Here follows the serial config:
>
> irx-bru1> sh s1
> ----------------------- Current Status - Port S1 ---------------------------
> Status: ESTABLISHED
> Input: 485776021 Abort Errors: 97
> Output: 501385203 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD+ CTS+
>
> Active Configuration Default Configuration
> -------------------- ---------------------
> Port Type: Netwrk Netwrk (Hardwired)
> Line Speed: Ext 128K Ext Clock
> Modem Control: off off
> Remote Host: xxx.xxx.xxx xxx.xxx.xxx
> Netmask: 255.255.255.192 255.255.255.192
> Interface: ptp1 (PPP,Routing) (PPP,Routing)
> Mtu: 1500 0
> Dial Group: 0
>
> TIA!
>
> --
> . .
> . .
> Xavier Mertens, . EuroNet Internet
> Network Operation Center . Lozenberg, 22
> . 1932 Zaventem
> E-mail: xavier@euro.net . Tel: +32 2 7171701
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>