Is there a seperate list for RADIUS queries?
We are using Version 2.01 of RADIUS for NT and when we add
Called-station-id attribute it is unable to authenticate the user.
ie - On the RADIUS log it says "unable to parse check........" as shown
below.
If we take the called-station-id out the user can authenticate.
Wed Feb 11 16:00:04 1998: [637] radrecv: Request from host 213.3.11.2
code=1, id=68, length=104
Wed Feb 11 16:00:04 1998: [637] User-Name = "example"
Wed Feb 11 16:00:04 1998: [637] Password =
"\264G\011\277\250q\206\256P\202\325\256\216\031#\373"
Wed Feb 11 16:00:04 1998: [637] NAS-Port = 8
Wed Feb 11 16:00:04 1998: [637] NAS-Port-Type = Async
Wed Feb 11 16:00:04 1998: [637] Service-Type = Framed
Wed Feb 11 16:00:04 1998: [637] Framed-Protocol = PPP
Wed Feb 11 16:00:04 1998: [637] Called-Station-Id = "4124333"
Wed Feb 11 16:00:04 1998: [637] Calling-Station-Id = "4124333"
Wed Feb 11 16:00:04 1998: [637] NAS-Identifier = "EGS"
Wed Feb 11 16:00:04 1998: [637] user_find: unable to parse check-items
in dbm entry for user example
Wed Feb 11 16:00:04 1998: [637] auth: access-request from EGS
(213.3.11.2) denied for unknown user example
Wed Feb 11 16:00:04 1998: [637] Sending Reject of id 68 to EGS
(213.3.11.2)
Any help would be very much appreciated.
Thanks
Ken
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>