AT&F@B0=2%A4=95%A2=1 should do the trick, then dial with ATDT nnn&nnn
Regards,
Rod
> -----Original Message-----
> From: Drew C Morone [SMTP:drew@j51.com]
> Sent: Wednesday, February 18, 1998 11:33 AM
> To: portmaster-users@livingston.com
> Subject: (PM) Bitsurfr Pro & AIMUX protocol
>
> I'm having trouble getting my bitsurfer to connect using the
> bitsurfer's
> AIMUX protocol. Even if I'm just trying to use one channel. I have a
> PM2E
> with a 5 BRI card.
> It works fine using single v.120.
>
> The line is provisioned for voice and data on both channels.
> What happens is that it never connects. I never get a "connect"
> message.
> Then I get "No Carrier" after about 2 min.
>
> Is this supported by the Portmaster?
> In the tech notes page it seems that it should be supported... They
> have
> given an init string (which doesnt' work) that indicates that it
> should
> work.
>
> Drew
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>