> Once upon a time eric@dol.net shaped the electrons to say...
[..]
> >I cannot telnet to one of my pm3s but i can use the pmconsole to get
> >there. The telnet port is set correctly at 23 but when i telnet there
> >i cannot even get to a prompt. Is there a telnet session going on to
>
> Sounds like you might have hung telnets. Remember 4 is the limit, and
> ghosts will take them up.
>
> <URL:http://www.livingston.com/Tech/Technotes/Hardware/command-netconn.shtml>
>
> >that pm3 that is blocking my attempt at a connection? can i disable
> >or kill the session from the pmconsole if that is possible? when i was
>
> Actually I don't think so, but I haven't used PMconsole in over a year
> I'd say...
>
If you use "pmcommand" that comes with the PMConsole package from the
command line on a Unix box, you will be able to kill those hung telnet
connections as described on the above mentioned web site. The "pmcommand"
tool accesses the Portmaster in the same way as PMConsole, but gives you
access to the regular command line (although one command at a time). It
is not affected by the hung telnets.
----
Josh Richards - <jrichard@livingston.com>
Beta Engineer
Lucent Technologies (Remote Access Business Unit)
(previously Livingston Enterprises, Inc.)
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.