Re: (PM) 2nd PRI setup ??

Lance Arbuckle (pm3@dns1.triadntr.net)
Mon, 19 Jan 1998 20:25:12 -0500 (EST)

> >
> >I just logged into our PM3 and our newly installed PRI is now showing "up"
> >when I do a show line1. I can't remember what I need to tell the PM to
> >get the channels to come up. I've already done a reset d1 but line1 still
> >shows no service. Does the box need to be rebooted to see the other PRI ?
>
> If it's plugged in and configured right it'll show up without a reboot.
> What do the status lights on the back show?
>

Hard to tell as I'm at home now. Line1 was showing a red LED and "down"
when I left for home but now line1 is shs showing "up".

Here's sh line1.......

ws-pm3-1> sh line1
---------------------- line1 - T1 Primary Rate ISDN ---------------

Status: UP Framing: ESF Encoding: B8ZS PCM: u-law

Receive Level: +2dB to -7.5dB

Alarms Violations
----------------------------- -----------------------------
Blue 22 Bipolar 1640085
Yellow 1 CRC Errors 130
Receive Carrier Loss 3 Multiframe Sync 1655267452
Loss of Sync 10

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.