> Ok, I'm completely stumped on this now. I have a Pm3 full of 48 modems,
> with all modems working correctly, and taking calls. However, the machine
> refuses to assign any calls to s30 and when I do a sh s30, this is what I
> get:
>
> mozart> sh s30
> --------------------- Current Status - ISDN Port
> S30 ------------------------
> Status: IDLE
> Input: 0 Abort Errors: 0
> Output: 0 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD- CTS- TELCO+ Disconnect:
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can
Are you sure that you don't have a problem with the PRI/CT1, 30 would
correspond to the 7th B channel on a PRI, and the 7th whatever you call it
on a CT1. It may be a telco issue, have them verify that it is working
correctly.
Later
Kelley
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.