Re: (PM) Radius Routing Question

Tom Fellenz (tlf@livingston.com)
Fri, 21 Nov 1997 10:58:38 -0800

At 10:35 AM 11/21/97 -0800, Walter Parker wrote:
>I've got a portmaster OR-U that I am using for dual-channel ISDN and I
>recently moved it from our hunt group to a pair of wild numbers. I used set
>loc loc-name phone 123-4567&123-7856 for the phone numbers. It only dials
>works with the first number. If I do a dial loc loc-name, it tries to make a
>connect on the second line but fails. If I switch the numbers by typing set
>loc loc-name phone 123-7856&123-4567 then the second line connects right
>away.

It appears the '123-7856' number needs to be troubleshot. What kind of
router are you dialing into from the OR-U?

Set max ports to 1 and leave off the other #. If it doesn't connect...

>Is there a way that I can reconfigure my OR-U so that it uses both channel
>in bonded mode when the numbers are different (my old ISDN router allowed me
>to do that) ?
>

Well, we don't do "bonding" - its MLPPP - and it occurs automatically (when
the location is set to 'multilink on', only if the destination IP address of
the device being dialed is the same for both links and that it supports MLPPP.

Hope this helps,
Tom Fellenz

/
Techical Support Engineering / L I V I N G S T O N
4464 Willow Road /___ Enterprises, Inc.
Pleasanton, CA 94588 (800)458-9966
http://www.livingston.com support@livingston.com
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.