I could be wrong though.
- Steve
- Systems Manager
- Community Internet Access, Inc.
- Gallup and Grants, New Mexico
On Mon, 17 Nov 1997, Mark O'Leary wrote:
> Hi.
>
> We've just added a second partial PRI to our pm3: It intially had a 30-line
> PRI connected to line0, and now has a PRI with only 5 lines enabled
> connected to line1.
>
> line0 shows the following:
>
> ---------------------- line0 - E1 Primary Rate ISDN ---------------
>
> Status: UP F1 Framing: CRC4 Encoding: HDB3 PCM: a-law
>
> Violations
> -----------------------------
> Bipolar 0
> CRC4 2
> E-bit 0
> FAS bit 0
>
> Line1 shows similarly:
>
> ---------------------- line1 - E1 Primary Rate ISDN ---------------
>
> Status: UP F1 Framing: CRC4 Encoding: HDB3 PCM: a-law
>
> Violations
> -----------------------------
> Bipolar 1
> CRC4 2
> E-bit 0
> FAS bit 0
>
> The problem being, how do I confirm that the additional 5 phone channels are
> actually there and working. At present our service never reaches more than
> 20 lines in simultaenious use to this box. Any suggestions as to ways I can
> force a call to come in over line1, or simulate traffic over the 30 lines of
> line0 or somesuch?
>
> Thanks
>
> M.
>
> --
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Mark O'Leary, | Voice: +44 (0161) 2756110
> Network Support Officer, | Email: Mark.O'Leary@mcc.ac.uk
> Manchester Computing, UK | or: mark@mcc.ac.uk
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.