i changed from area 30 to area 0 and it works fine.
so, how do we get this to work outside the backbone area?
mike
On Fri, 22 Aug 1997, W Christopher Martin wrote:
> mike cullerton writes:
> > i'm not sure what to think now :( i have done the following.
> ...
> > add area 30
> > set ospf area 30 range 204.71.56.0/24
>
> This probably isn't your problem, but I recall in some OSPF
> documentation somewhere that starting with area 0 was recommended.
> This is due to the fact that you must have an area 0 (backbone)
> if you ever define more than one area.
>
> Chris Martin
> Onramp Network Services Inc.
>
--
mike cullerton michaelc@frii.com 970.224.3668