Re: Ascend P50 -> PM2

Simon Nuthall (simon@livingston.com)
Sun, 3 Aug 1997 15:07:24 -0700

What you need is a huntgroup setup on the BRI lines by the telco. This
will let the first call come in and the second ring through to the other B
Channel. Seeing as it is just one BRI you could get away with setting up a
"call forward on busy".

From: Ben Gasser <netwkhlp@gabs.net>
To: portmaster-users@livingston.com
Date: Sunday, August 03, 1997 1:46 PM
Subject: Ascend P50 -> PM2

>We have have a client who has an Ascend Pipeline 50 and is attempting to
>connect into our PM2 with a 5 Bri card. Our problem is bonding both of
the
>B channels together, especially since the client will be dialing into out
>PM2 using IP.
>
>The Pipeline 50 seems to make the call and attach to the first availble
>channel, but the second channel attempts to dial in and attach to the
same
>port on the PM2 with no success, especially since the first call has
>already used the port.
>
>Please help with any thoughts or ideas, especially if you have done this
>successfully.
>
>
>Ben Gasser, CNE
>National Network Serivices, Inc.
>Voice: 913.491.5388
>Fax: 913.491.1529
>