> What you need is a huntgroup setup on the BRI lines by the telco. This
> will let the first call come in and the second ring through to the other B
> Channel. Seeing as it is just one BRI you could get away with setting up a
> "call forward on busy".
The p 50 will automatically rollover to the 2nd b channel if the first is
busy. You wont need hunt for it. I tested this just a few weeks ago. BTW,
you DO need hunt for a Motorola BS pro.
>
>
> From: Ben Gasser <netwkhlp@gabs.net>
> To: portmaster-users@livingston.com
> Date: Sunday, August 03, 1997 1:46 PM
> Subject: Ascend P50 -> PM2
>
> >We have have a client who has an Ascend Pipeline 50 and is attempting to
> >connect into our PM2 with a 5 Bri card. Our problem is bonding both of
> the
> >B channels together, especially since the client will be dialing into out
> >PM2 using IP.
> >
> >The Pipeline 50 seems to make the call and attach to the first availble
> >channel, but the second channel attempts to dial in and attach to the
> same
> >port on the PM2 with no success, especially since the first call has
> >already used the port.
> >
> >Please help with any thoughts or ideas, especially if you have done this
> >successfully.
> >
> >
> >Ben Gasser, CNE
> >National Network Serivices, Inc.
> >Voice: 913.491.5388
> >Fax: 913.491.1529
> >
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~