> I know that I'm just missing something simple here but here it goes:
>
> I'm trying to set up an Ascend 75 for a customer. Just to test if the
> connection works I'm manually dialing out from the connections "table". It
> dials and connects to the portmaster fine but apparently nothing is said
> between them (I turned on PPP debugging and saw nothing) and it is
> eventually disconnected. When I turn on ISDN debugging see this:
>
> S28: Sending Request Connect - 64Kbps / Data (B1 ID:146)
> S28: Received Connect - B1
> S28: Sending Disconnect Request
> S28: Received Disconnect Ack
> S28: Received Call Clear
The pipeline 75 works quite well dialing to PM3s with PRI and CT1. You
should check the pipeline to make sure all(in configuration and
connection) of the parameters are set correctly. I haven't yet tried it
with the BRI.
Also the users file should be set up correctly. If you want more info
email me.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gene Imes http://www.ozob.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~