Re: OSPF checksum error on Cisco

John G. Thompson (jgt10@livingston.com)
Sun, 13 Jul 1997 18:17:02 -0700

At 10:34 PM 7/12/97 -0400, W Christopher Martin wrote:
>Stephen Fisher writes:
>> I have a PM2e running ComOS 3.5.1b17 on a 10baseT Ethernet with a Cisco
>> 2501. For some reason lately I have been getting this syslog error every
>> ten seconds from the Cisco:
>>
>> Jul 12 17:10:48 eth0-router0.Gallup.cia-g.com 1740: Jul 12 17:10:47:
>> %OSPF-4-ERRRCV: Received invalid packet: Bad Checksum from 206.206.162.3,
>> Ethernet0
>
>You aren't alone. I reported this to support@livingston.com on Monday
>(July 7), but haven't received any response yet.

If you need a quicker response, please CALL Livingston technical support
and open a case. Emails are handled by 2 TSEs on a best effort basis (and
by other TSEs on a very irregular basis), calls are handled by 5 CSRs and
25 TSEs.

JGT
---------------------------------------------------------------------------
John G. Thompson Livingston Enterprises Inc. Phone: (800) 458-9966
JOAT(MON) 4464 Willow Road Fax: (510)737-2110
support@livingston.com Pleasanton, CA 94588 http://www.livingston.com/
---------------------------------------------------------------------------
******* The solution to any problem lies in its proper definition. *******