> Hi!
>
> Since upgrading our PM2E to ComOS 3.5, I've encountered a
> number of strange problems. One thing is that I can't have
> RADIUS users with static IP anymore. I wanted to route a
> subnet to a static IP address, but the PM will always assign
> an address from the pool of dynamic IPs! I've contacted
> tech support for this problem but they couldn't help me
> so far. Here's my sample RADIUS (1.16) user:
>
> test Password = "test12xy"
> User-Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = 194.191.124.200,
> Framed-Netmask = 255.255.255.224,
> Framed-Routing = None,
> Framed-Route = "194.191.124.192/27 194.191.124.200 1",
> Framed-Compression = Van-Jacobsen-TCP-IP,
> Framed-MTU = 1500
Try upgrading to RADIUS 2.0 then see....
-- Aloha,Sherwood