> > No trunking involved single line that was handling better than 33.6
before.
>
> ?? I don't understand what you're saying here... you got higher than
> 33.6Kbps? If so, using what?
Yep, pretty consistently better, but he was fed out of the same CO as our
lines and those lines came straight through with only one conversion in the
loop. Kind of a hybrid situation. Probably not worth discussing since it
may never happen again. That's why I wont get rid of them since we had our
PRI's installed :-)
> > I was just wondering if anyone had found a good init string for these
> > pieces-o-s@#t.
I figured that since it was knocking the connect rate down to an even 28.8
it may be an init string.
> Again, in my note, I think I sent one... lock it to V.34+ setting,
usually
> something like +MS,11,1,14400,33600 ... unless you do have a server-side
> digital connection.
>
>
> > Certainly not something we're going to be using hard core, just a
little
> > experiment in agony :-)
>
> well, you started off with USR equipment... ;) should have jump to the
> PM3 and waited for K56Flex... though I'd like to hear from someone if
BRI
> to the USR Imodem to a PM2 does work or not for X2...
Easy now, we have reservation or registration #2 and #3 for the 56KFlex
upgrade for our PM3's, we jumped all over that band wagon.
> > >This is probably because X2 is a farce and is destined to fail. It
> > >can only work if your CT1 is trunk side, and there is no more than a
> > >single A/D conversion between you and the customer, and even then,
I've
> > >never heard of anyone successfully getting more than about 40k.
That I believe, once again ... I was getting bored since our new PM3's have
been screaming right along !!!
>
>
> 8) play?!?!? gawd, I wish I had time for that... Let's see, BIND is
> vulnerable...
Don't use it .....Using MetaInfo's DNS for NT
stupid MSIEAK has to be upgraded,
Done that kind of a pain in the ass ain't it?
*gleep* gotta run the accounting, urk... new PRI has to be
> ordered,
Ordered two more on Thursday
user has to be talked through how to restart his dialler as he
> shutoff the computer in the middle of a session, CMOS died on another
> customer's computer, someone wants info on signing up, etc etc etc....
and
> this is a Saturday of all days!
Hey you've got to let other people have some fun also Sherwood !!
Our Tech Support guys are pretty sharp so that leaves me more time to
"play" around with goofy projects.
Anyway, you help has been great in the past thanks
>
>
> --
> Aloha,
>
> Sherwood