I have a First Portmaster 2E20+BRI and a Second Portmaster 2E10.
The BRI circuits on the First are running to subnetted /27 networks.
Both Machines are running ComOS 3.5, both are on the Same Class C network
ala:
PM1
Dialups: xx.xx.12.66-86
BRI's: xx.xx.14.32/27 via xx.xx.12.230 (NT routing mess requires this)
xx.xx.14.64/27 via xx.xx.14.65
ether0: xx.xx.12.65
Default Gateway: xx.xx.12.32
PM2:
Dialups: xx.xx.12.100-
ether0: xx.xx.12.63
Default Gateway: xx.xx.12.32
Now what happens is that when people dial into the second PM they cannot
see the networks passed throught the BRI's on the first.
I've tried rip on and off and adding static routes in the Second PM : Both
Rip and static generated xx.xx.14.0/27 207.107.12.65.
Besides the obvious mess my topology is in can anyone see the problem.
The second PM shows the proper default route to xx.xx.12.32 etc and
I can ping the BRI networks from the second PM but not from dialups on the
second PM.
Help appreciated.
-------------------------------\\|!|//--------------------------------
| Colin P. Ryan \!/ Building Strategies and |
| Local GlobalAccess Inc Solutions for Internets |
| 320 1/2 Bloor St. W. Toronto. ON and Intranets |
| e:drop@lglobal.com Phone: (416)515-7400 |
----------------------------------------------------------------------