> On Wed, 9 Apr 1997, Joshua Barney wrote:
>
> > I have several other Cisco routers and some PM2ERs that are just going to
> > be coming up. Would I have to add the IETF to all the Serial interfaces
> > on all the Ciscos or is there some kind of work around???
>
> You can set IETF on a per interface basis. Set all the cisco serial
> interfaces to cisco and all the PM2er Interfaces to IETF (on the cisco of
> course)
>
> -Matt
>
> --
> ----------------------------------------------------------------------
> Matthew S. Crocker - Systems Administration matthew@crocker.com
> Crocker Communications Phone: (413) 587-3350
> PO BOX 710 Fax: (413) 587-3352
> Greenfield, MA 01302-0710 http://www.crocker.com
> ----------------------------------------------------------------------
>
But you can't use the command encapsulation frame-relay IETF on the
subinterfaces....
--Josh
====================================================================
Joshua Barney -- josh@bloomnet.com Northeast Nebraska ComNet
Network Administrator (402) 373-4603
1-800-359-2981
http://www.bloomnet.com