Re: PM2E on bsdi configuration
Lin Feng (s9ulzf@fnma.com)
Fri, 13 Oct 1995 09:21:52 -0400
>
>
> You did make sure you set the DIP switch to use the ethernet adapter that
> you are using to connect to your network, right? You have to select
> which one you are using (BNC,10baseT,AUI/DIX)...
>
> Scott
>
>
>
Thanks, Scott.
Yes. I did flip up dip switches 4 & 5 on the PM2 to use 10BaseT. I also
checked the the broadcast address and netmask to make sure they match that
on the bsdi box and they do... but I still cannot make them see each other.
(I have nothing else except the hub, bsdi box and the PM2 on the local net
which is not connected to the internet). Have any other ideas? Thanks.