[Top] [Table Of Contents] [Prev] [Next] [Index]
3 out of 8 total pages
 

About This Addendum  


  The PortMaster® 4 User Manual Addendum from Lucent Technologies provides the following updates to the PortMaster 4 User Manual:
  Consult the PortMaster 4 User Manual for installation, configuration, and command information for the PortMaster 4 Integrated Access Concentrator. For additional configuration, maintenance, and troubleshooting information common to all PortMaster products, see "PortMaster Documentation."
 

       Audience

  This addendum is designed to be used by qualified system administrators and network managers. Knowledge of basic networking concepts is required.
 

       PortMaster Documentation

  The following manuals are available from Lucent Technologies. Unless otherwise noted, they can be ordered through your PortMaster distributor or directly from Lucent.
  The manuals are also provided as PDF and PostScript files on the PortMaster Software CD shipped with your PortMaster.
  In addition, you can download PortMaster information and documentation from http://www.livingston.com .
 

       RFCs

  To find a Request for Comments (RFC) online, visit the website of the Internet Engineering Task Force (IETF) at http://www.ietf.org/ .

 

  RFC 1157, A Simple Network Management Protocol (SNMP)

  RFC 1212, Concise MIB Definitions 

  RFC 1213, Management Information Base for Network Management of TCP/IP-based Internets: MIB-II

  RFC 1700, Assigned Numbers

  RFC 2138, Remote Authentication Dial In User Service (RADIUS)

  RFC 2139, RADIUS Accounting

  RFC 2400, Internet Official Protocol Standards

 

       Document Conventions

  The following conventions are used in this addendum:
 
  Convention    Use    Examples 
 Bold font   Indicates a user entry--a command, menu option, button, or key--or the name of a file, directory, or utility, except in code samples.

  · Enter version  to display the version number.

  · Press Enter .

  · Open the permit_list  file.

 Italic font  Identifies a command-line placeholder. Replace with a real name or value.

  · set Ether0 address Ipaddress

  · Replace Area with the name of the OSPF area.

 Square brackets ([ ])  Enclose optional keywords and values in command syntax.

  · set nameserver [2] Ipaddress

  · set S0 destination Ipaddress [Ipmask]

 Curly braces ({  })  Enclose a required choice between keywords and/or values in command syntax.  set syslog Logtype {[disabled] [Facility.Priority]}
 Vertical bar (|)  Separates two or more possible options in command syntax.

  · set S0|W1 ospf on|off

  · set S0 host default|prompt|Ipaddress

 

       Document Advisories

  Note ¯ means take note. Notes contain information of importance or special interest.

 

  Caution ¯ means be careful. You might do something--or fail to do something--that results in equipment failure or loss of data.

  Warning ¯ means danger. You might do something--or fail to do something--that results in personal injury or equipment damage.

 

       Contacting Lucent NetCare Technical Support

  The PortMaster 4 comes with a 1-year hardware warranty.
  For all technical support requests, record your PortMaster 4 ComOS version number and report it to the staff of NetCare® Professional Services or your authorized sales channel partner.
  New releases and upgrades of PortMaster software are available at http://www.livingston.com/forms/one-click-dnload.cgi  or by anonymous FTP from ftp://ftp.livingston.com/pub/le/ .
 

       For the EMEA Region

  If you are an Internet service provider (ISP) or other end user in Europe, the Middle East, Africa, India, or Pakistan, contact your local Lucent sales channel partner. For a list of authorized sales channel partners, see the World Wide Web at http://www. livingston .com/International/EMEA/distributors.html .
  If you are an authorized Lucent sales channel partner in this region, contact the Lucent NetCare EMEA Support Center Monday through Friday, 24 hours a day.
 

       For North America, CALA, and the Asia Pacific Region

  Contact Lucent NetCare Monday through Friday between the hours of 7 a.m. and 5 p.m. (GMT -8).
 

       PortMaster Training Courses

  Lucent NetCare Professional Services offers hands-on, technical training courses on PortMaster products and their applications. For course information, schedules, and pricing, visit the Lucent NetCare website at http://www.netcaredata.com .
 

       Subscribing to PortMaster Mailing Lists

  Lucent Remote Access maintains the following Internet mailing lists for PortMaster users:
 

[Top] [Table Of Contents] [Prev] [Next] [Index]
3 out of 8 total pages
spider@livingston.com
Copyright © 2000, Lucent Technologies. All rights reserved.