Re: (PM) pm-25 on the fritz

Scott Carpenter (scarpenter@assuredaccess.com)
Tue, 28 Dec 1999 12:04:37 -0800

You just need to load a new software image. That should work.

If it does not call Lucent Tech Support.

At 11:37 AM 12/28/1999 -0800, Mark Zedwick wrote:
>I've been gone for a while, but I didn't see anything like this in the
>archive, so .....
>
>I have a pm-25 that got interrupted during an upgrade. Yes, I know, that's
>bad. So, now it won't boot. So, I tried a netboot, and that seemed to work
>okay. It came up, downloaded the image, and booted into ComOS. I logged in,
>and got this.
>
>ether0 active ... 64K burst-IO
>Running ComOS...
>
>INet-X/Corvallis
>
>
>PortMaster Console login: !root
>Password:
>ca06> show ses
>SYSMSG604 SYSMSG211 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118
SYSMSG118
>SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG118
SYSMSG118
>SYSMSG118 SYSMSG118 SYSMSG118 SYSMSG208
>SYSMSG459 ca06> show global
>SYSMSG1071 SYSMSG1030 SYSMSG1031
>SYSMSG1070 SYSMSG1035 OSPF Priority: 0
> OSPF Router ID: 206.163.142.200
>SYSMSG1072 , 198.68.7.11
>SYSMSG1068 SYSMSG1037 Maximum PMconsole: 5
>SYSMSG1038 (Pool Size 30)
>SYSMSG1039 SYSMSG1270 PPP Authentication: PAP: on CHAP: off
>SYSMSG141 IPX
>ca06>
>
>
>Cool, eh? On further study, this box always wants to netboot now,
>independent of the position of #2 dipswitch. Am I hosed? Is there some
>magical recovery tool that will save this poor pm-25 from the grave?
>--------
>Mark Zedwick
>ProAxis Technical Support Supervisor
>(541) 757-0248, (541)967-0248, (503) 587-0248
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>