(PM) new class C repost

keith@mail.telestream.com
Mon, 6 Dec 1999 19:20:42 -0800 (PST)

I'm using the OR T-1/E-1 and have run into a bit of a head scratcher.
I've got our one /24 routed and all is fine. Easy enough not realy
anything to it. The second /24 I want to split up into a /27 and can't
seem to do it for some reason. What kind of command does the OR need to
see to make it route our second class C as a /27 ????
___
| | 205.238.4.0/24 ----- Routing fine
--- OR |----- 205.238.16.0/27 ----- Can't figure how to do it.
w0 |___|ether0

To do the /24 all I had to do was add route 205.238.4.0 205.238.4.1 1
the .4.1 being the ether0 on the OR. What would the add route command
have to be to get the .16 to be something like this

add route 205.238.16.32/27 205.238.4.1 1
add route 205.238.16.64/27 205.238.4.1 1
etc etc.
????

Thanks for any advise or pointers to a RTFM :) If I'm completely screwed
in my thinking I'd like to know that too.
Thanks a million.

Keith

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>