These SHOULD use the same &U and &N commands as the Usr/3com.
The commands may be found at http://808hi.com
...Charlie...
-----Original Message-----
From: owner-portmaster-users@livingston.com
[mailto:owner-portmaster-users@livingston.com]On Behalf Of Craig Baird
Sent: Tuesday, February 23, 1999 3:55 PM
To: portmaster-users@livingston.com
Subject: (PM) Smartlink TI (Texas Instruments) chipset modems
I have a couple of users with Smartlink V.90 modems from Archtek. These
things have Texas Instruments chipsets. The modem model is 5634BTS.
This modem connects fine (ComOS 3.8)--usually between 49,333 and
50,666--but renegotiates a lot. I'd like to try to limit its connect
rate to see if that solves the problem, but I can't seem to find any
info on how to do this. Does anyone have an init string for setting the
maximum connect speed for the TI chipsets?
Thanks!
Craig
Xpressweb Internet Services
bairdc@xpressweb.com
http://www.xpressweb.com
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>