(PM) NFAS on PM4

Tim Seibert (portadmin@cvn.net)
Mon, 22 Feb 1999 15:58:03 -0500

Hi,
I'm going to be replacing a group of PM3's with a PM4 in one of my pops
soon. NFAS is an option available from the local telco (Sprint). I'm
looking for comments from anyone who is currently using NFAS on a PM4. Are
there any problems I should be aware of before I have the lines reconfigured?
I notice in the PM4 datasheet it has NI-2 in parentheses after NFAS.
Currently, I have my PM3's set to DMS-100, since they are connected to a
DMS-100/200 switch. Does the ISDN switch type need to be set to NI-2 for
NFAS to work? What effect might I encounter if I set it to NI-2 without NFAS?
Thanks for any advice you can give me.

Tim

-- 
Tim Seibert ( seibertt@desupernet.net )
D&E SuperNet -- South Central PA's Local Internet Provider -- (
http://www.desupernet.net )
Ephrata Office                                 Fayetteville Office
1-87SUPERNET                             800-253-1192
                                                           717-352-3270


-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>