I have a problem, that I was unable to solve browsing through
portmaster-users archives.
I have several portmasters PM25 they are in one ethernet segment.
They both use pools for dialin users. We also have special users with
dedicated IP addresses. The point is to be able to assign addresses to
those special usrers from different class or subnet that the ethernet IP
addresses. Those dedicated addresses must be routed when user connects to
each PM25. The router for this network is Cisco 2500 series.
Configuration details below :
PM1:
ethernet 10.10.5.34
pool 10.11.1.0 - (static route on cisco - 10.10.5.1)
PM2:
ethernet 10.10.5.35
pool 10.11.1.32 - (static route on cisco - 10.10.5.1)
Addresses to be used as dedicated are :
10.22.1.0/24
10.23.1.0/24
If anyone knows how to use RIP or OSPF (if it exists in PM25 at all) in
this case - please reply. Maybe aditional address on interface ethernet on
PM25 would be enough - but I don't know how to implement it.
Regards
Savit
Andrzej Stella-Sawicki <Savit@Sav.NET>, <savit@altavista.pl>
Polbox Sp. z o.o. http://www.polbox.pl/
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>