Regards
Scott Stavretis
Connect Direct Internet
---- www.cdi.com.au ----
On Sat, 20 Feb 1999, Chris Joyce wrote:
>
> I have made some ground now but seem to have come to a small problam (
> problay due to lackof knolwge )
>
> with my OnRamp10 service connected what isdn settings should I use ?
>
> I'm trying to get 8*analog ppp in and 2*64k isdn out
>
> I tryed the following
>
> set isdn ts014
> ISDN Switch Type: ts014
> End Point Disc: None
>
> no bussy to along , dial out ok ( on a S# port )
>
>
> set isdn net5
> ISDN Switch Type: etsi
> ISDN numberplan: ISDN E.164
> ISDN numbertype: Local
>
> analog in ok , no dial out
>
>
> set isdn etsi
> ISDN Switch Type: etsi
> ISDN numberplan: ISDN E.164
> ISDN numbertype: Local
>
> analog in ok , no dial out
>
> chris
> .
> Chris Joyce _--_|\
> / \
> chris@hislora.com.au \_.--._/ <--- about here
> v
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>