> the IP address of the Portmaster, the "address negotiated" then
> the PPP protocol seems to start, and I wait, wait, for at least 2mn
> and the connection goes down.
> I made a dump with "dring" and I can read "S1: LCP Open", then further
> on: "connection failed"
> Thank's a lot if someone can give me any help or information, to get out
> of this problem!
Not really enough info to say but when you run the debug have you taken
it and run it though the PPP deccoder ring on the web server? What does
a 'show s1' display when the session is attached to the PM? Do you have
syslog setup and if so what does the syslog show? Have you verified
routing and the Idle and Session Timeouts?
-- Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@ra.lucent.com> "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer"
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>