-----Original Message-----
From: owner-portmaster-users@livingston.com
[mailto:owner-portmaster-users@livingston.com]On Behalf Of Thomas Kinnen
Sent: Monday, February 15, 1999 2:55 PM
To: Portmaster-Users
Subject: Re: (PM) Stuck PM3 ports
"Erik P. Power" wrote:
> and can shed some light on it. I have a customer dialing ISDN DOV to my
PM3,
> and after he disconnects, the port(s) he was connected to still show him
as
> using those ports. Pinging the IP addresses of the "dead" ports shows he
> has, indeed, disconnected. If I manually reset the ports in question, the
> ports show themselves available again. Otherwise, I have to wait 15 to 20
> minutes for the ports to clear. Something really strange, though--PMVision
PRI or CT1? If PRI do an ISDN debug and see if you are getting the single
to
clear the call from the switch.
----
Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@ra.lucent.com>
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>