RE: (PM) 2 BRIs to a PM3

Kelsheimer, David (DKelsheimer@ceoit.co.orange.ca.us)
Sun, 14 Feb 1999 13:01:27 -0800

You can also try an Ascend MAX1800. It has 8 BRIs on the unit, which can be
inverse-muxed from one B channel up to the full 16 B channels. I'm not
quite sure how it would interact with a PM beyond the first BRI though.
I've never used MultilinkPPP beyond 2 B channels, I've always used Ascends
MP+ protocol for that.

HTH

-David

-----Original Message-----
From: Scott Silzer [mailto:scotts@globalserve.net]
Sent: Saturday, February 13, 1999 9:27 AM
To: Gary Carr; portmaster-users@livingston.com
Subject: Re: (PM) 2 BRIs to a PM3

Try a Cisco 2600 with 2 BRI WIC Cards.

At 11:54 AM -0500 2/12/99, Gary Carr wrote:
>Are there any devices in the market that will allow a customer to bond 2
>BRIs and connect to a group of PM3s bonded? Is this possible?
>
>
>
>Gary
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

Scott Silzer
MailTo:scotts@globalserve.net
GlobalServe Communications
A Primus Canada Company
1-888-CITYNET
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>