Re: (PM) Dbug on PM3
Matthew Walker (mwalker@lidcam.com.au)
Fri, 12 Feb 1999 10:26:07 +1100
"Larry" <pm3@utec.net> writes:
>We just installed 2 new PRI lines form a CELEC ESF B8ZS on a new PM3
>when we try to do a debug on this PM3 we get this from PmVision 1.3b6
>there are 4 other PM3 running the same line setup but from Bell Atlantic
>that don't do this the connection rates are about 10% off from what we get
>from Bell
>the lines look to be taking calls ok not much thech beond the norm
>connection problems.
>
>EXPIRY TIMER 203
>D1: send 00 01 01 79
>D1: recv 00 01 01 25
>L2_Go: L2_PktIn=2cdc14, hdr=2c894c, proto=0, src=200 0 1 1
>L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1
>L2_Go: L2-NoPkt dslid=0, src=20a, event=1250
>L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1250
>EXPIRY TIMER 203
>D0: send 00 01 01 13
>D0: recv 00 01 01 ef
>L2_Go: L2_PktIn=2cd0e4, hdr=2cdc14, proto=0, src=200 0 1 1
>L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1
>L2_Go: L2-NoPkt dslid=1, src=20a, event=1250
>L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1250
G'Day Larry,
these are normal ISDN keep alive messages on Layer 2. TIMER 203 is just the
timer that says it's time to send another one. I think your connection
problems would have more to do with padding, robbed bit etc.
Regards
Matthew Walker
Matthew Walker <mailto:mwalker@lidcam.com.au> Lidcam Technology
Ph: +61 3 9865 9077 Level 5 499 St Kilda Rd
Fax: +61 3 9866 1245 Melbourne VIC 3004
<http://www.lidcam.com.au/users/matthew/> AUSTRALIA
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>