(PM) Dbug on PM3

Larry (pm3@utec.net)
Thu, 11 Feb 1999 08:09:13 -0500

We just installed 2 new PRI lines form a CELEC ESF B8ZS on a new PM3
when we try to do a debug on this PM3 we get this from PmVision 1.3b6
there are 4 other PM3 running the same line setup but from Bell Atlantic
that don't do this the connection rates are about 10% off from what we get
from Bell
the lines look to be taking calls ok not much thech beond the norm
connection problems.

EXPIRY TIMER 203
D1: send 00 01 01 79
D1: recv 00 01 01 25
L2_Go: L2_PktIn=2cdc14, hdr=2c894c, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1
L2_Go: L2-NoPkt dslid=0, src=20a, event=1250
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1250
EXPIRY TIMER 203
D0: send 00 01 01 13
D0: recv 00 01 01 ef
L2_Go: L2_PktIn=2cd0e4, hdr=2cdc14, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1
L2_Go: L2-NoPkt dslid=1, src=20a, event=1250
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1250

Larry L.
LRL@utec.net

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>