I am about to move our dynamic IP pool from one netblock, to another,
however I hope to keep the ether0 address for each PM the same.
We do have a couple static IP customers now and know that I will have to
update those IP's to reflect the change, but will we have to change the
routing entry for the radius entry, or will it pick it up via the global
config of the PM itself?
Could it be as simple as a "set assigned xxx.xxx.xxx.xxx" on each PM and
then a reboot?
Sorry to ask such basic questions, my brain is just a tad fried this week
and some of the most simple things seem to be a real challenge today! :(
Network: 199.217.72.0 (has servers, switches, routers, etc)
NetMask: 255.255.255.0
Router 199.217.72.254 (to world)
PM1 199.217.72.30
PM2 199.217.72.31
PM3 199.217.72.32
PM4 199.217.72.33
PM5 199.217.72.34
Network: 207.149.168.0 (dynamic IP Pools)
Netmask: 255.255.255.0
PM1 Pool 207.149.168.1-48 (pool size 48)
PM2 Pool 207.149.168.49-96 (pool size 48)
PM3 Pool 207.149.168.97-144 (pool size 48)
PM4 Pool 207.149.168.145-192 (pool size 48)
PM5 Pool 207.149.168.193-240 (pool size 48)
StaticIP 207.149.168.241-254 (static ip dialup customers)
- Mike
------------------------------------------------
Rock Island Communications, Inc. (360)-378-5884
http://www.rockisland.com/ San Juan Islands, WA
------------------------------------------------
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>